GTX Ranges 2018-07-04T12:47:06+00:00

GTX Ranges

Our new Gemtex GTX tanks outperforms virtually every other kind of hot water system due to the vast surface area of our coils. The large surface area coils are  specifically designed  for condensing boilers, the over-sized coils ensure a low return temperature at the boiler, maximising the performance of condensing boilers, enabling them to stay in condensing mode during most of the hot water production cycle. Due to the high recovery coils when matched with one of our ranges of Gemtex boilers hot water can be recovered from 15 degrees to 55 degrees in as little as 20 minutes.

The GTX range is made of stainless steel for long life expectancy and is insulated to the latest European standards. The GTX range is finished in a hard durable white plastic coating providing an aesthetically looking finish. Ranges available in our domestic range are 150,200,300 & 500 litres with our commercial ranges reaching up to 5000 litres.

Each tank comes fully equipped with a pre wired control panel which consists of a stainless steel immersion heater and over heat stat which connects directly to the supplied energy shut off valve. The 2 way switch located on the control panel allows the user to either use the gas boiler to heat the cylinder or the use of the immersion heater in the event that the boiler/system isn’t operational, this prevents the immersion heater being left on after repairs have taken place to the boiler/system.

All ranges come supplied as standard with all components to comply with G3 regulations. The P&T valve is factory fitted with the energy shut off valve, pressure reducing valve, expansion vessel and pressure relief valve supplied in the installation kit. The tank also consists with a full bore drain kit which is located at the bottom of the tank allowing for the complete tank to be drained for maintenance or disinfecting .

For further information please view our in-depth brochure.